6-WEEK COURSE · WEEK 6

Glazing

Glazing

Glazing

Thin is safer than thick.

Thin is safer than thick.

Thin is safer than thick.

Glaze what’s been fired once; choose colours for the rest, and we glaze them. Then look back at your six weeks.

Glaze what’s been fired once; choose colours for the rest, and we glaze them. Then look back at your six weeks.

EVERY PIECE, A TO D

Choose colours from the fired tiles, not the bucket.

SIDE VIEW · UPSIDE DOWN

A: Wipe, hold its foot (side view · upside down)

Wipe, hold its foot

Wipe, hold its foot

SIDE VIEW · UPSIDE DOWN

B: Wax the foot (side view · upside down)

Wax the foot

Wax the foot

CUT IN HALF

C: Pour in, turn, out (cut in half)

Pour in, turn, out

Pour in, turn, out

CUT IN HALF

D: Dip to the wax (cut in half)

Dip to the wax

Dip to the wax

Wipe, then touch only the foot.

Wipe, then touch only the foot.

A wrung-out sponge lifts the dust, inside and out.

Wax the foot; let it dry.

Wax the foot; let it dry.

Keep the bottom 6mm bare, or it sticks to the kiln shelf.

Inside first, then out.

Inside first, then out.

Stir well. Pour in, turn, pour out; wipe drips; wait till dull.

Count to three.

Count to three.

Or the bucket’s count. Foot up, straight down to the wax.

Check it

Turn each piece over before it goes to the kiln. Bottom 6mm clean: ready. Once dry, scratch low down outside with a needle: about a bank card thick.

If it goes wrong

Runs onto the shelf

Runs onto the shelf

Thinner low down. Runny? 1cm bare.

Thinner low down. Runny? 1cm bare.

Bare patches

Bare patches

Wipe off dust and hand oil first.

Wipe off dust and hand oil first.

A thick rim line

A thick rim line

Dip before the rim dries. Dry? Ask us.

Dip before the rim dries. Dry? Ask us.

Thin and patchy

Thin and patchy

Stir to the bottom; glaze a dry pot.

Stir to the bottom; glaze a dry pot.

Ready in about 2–3 weeks; we’ll WhatsApp you a collect-by date.